Sintering transforms a brown part into a fully metal part. The release material gets extruded as an interface between the part and its supports so that once your part comes out of the furnace, it's easy to remove. The filament is heated and extruded onto the build plate where the part is built up layer by layer. This filament material is metal powder safely suspended within a two-part plastic binder. The first material is the metal and the second is a ceramic release. ![]() ![]() The print is built from two materials stored in the heated chamber located at the top of the printer. After preparing the print with printing software, it’s time to move to the metal 3D printer itself, the Metal X.īefore starting a print, the Metal X automatically maps and levels the print bed using a unique nozzle touch-off process to ensure the first layer prints properly. Eiger then slices your part into discrete layers and identifies overhanging features, and builds supports and a raft underneath your part.Įiger also monitors the metal part’s progress through each stage of the process. When Eiger slices your part, it gets scaled up to account for shrinking and deformation in the downstream processes. Eiger automatically configures your part based on the material and printer you’re using for the job. Eiger is a cloud-based slicing and print management system that comes with every Markforged product. You then export to STL and upload into Eiger. ![]() Every 3D printed part starts in CAD, where you design your part.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |